Warhammer 40k: Exploring the Scale of the Iconic Tabletop Game

Is 40K 28mm or 32mm?

“28mm” is a common name for the scale 40k and other wargames use and was suppossed to be the typical heigh of a human in that scale. It’s also called “heroic scale” and it’s roughly equivalent to 1/56. 32mm is the normal base diameter size for marines since 2014 or so.

What scale is the 40K?

The nominal scale of 40K is 28mm ‘heroic’. If you convert this to proportional scale, GW infantry models are supposedly about 1/60 scale. (A six foot tall man measures five feet eight to the eyes.) Other manufacturers sometimes describe 28mm as 1/56 scale.

Is 1/72 the same as 28mm?

Is 1:72 scale the same as 28mm? No, 1:72 scale is not the same as 28mm. 1:72 miniatures, vehicles and buildings look tiny compared to 28mm miniatures.

What scale is 32mm?

Some manufacturers measure from foot to eye-line height normally referred to as 28mm minis. Others are measured from foot to top of head these are 32mm minis. Both of these are roughly 1/56 scale in relative terms, therefore they can be matched with vehicles of that scale.

Is D&D 28mm or 32mm?

The official D&D miniatures are 28mm tall, which means that the miniature for a typical 6-foot human is 28mm tall; however, this can vary. Due to the scale of D&D models, enormous, gigantic, and gargantuan monsters will be larger, but small and diminutive creatures will be smaller.

Are D&D Minis 28mm or 32mm?

I looked online and found that the standard size for a miniature is 28mm with a 1″ or smaller base.

Is 40k 28mm?

It’s typically considered to be 28mm heroic scale. That means it’s kind of 28mm but some features like weapons are modelled slightly larger for emphasis and style.

Is Warhammer 1/32?

Warhammer range (from Games Workshop company): The scale of Warhammer (and Age of Sigmar) miniatures is 1:56 (28mm / 32mm) scale, with Heroic scale proportions.

What is Warhammer true scale?

Basically on the table an imperial guardsman and an astartes are the same height, when the former should be roughly shoulder height to the latter. True scale is proportionally correct miniatures in that context.

Is Warhammer 28 mm?

In Games Workshop’s Warhammer and Warhammer40k, we say the miniatures are 28mm scale, but what does that actually measure? Its not base size, or height. It’s the same as having a scale of 1:64. 28×64=1792 or about 1,79 meter which is presumably the average height for a normal human male in that world.

Why are miniatures 28mm?

That implies that a 28 mm tall figurine represents a 1.68 m (5 ft 6 in) person – which is a reasonable number for a modern 50th percentile male (See: Human height). Another popular scale is 1/72 or 1 inch equals 6 foot which uses 20 mm, to 25 mm miniatures.

Is 1:72 scale small?

1:72 scale is a scale used for scale models, most commonly model aircraft, where one inch on the model equals six feet (which is seventy-two inches) in real life. The scale is popular for aircraft because sizes ranging from small fighters to large bombers are all reasonably manageable and displayable.

What scale is DND?

The Dungeons & Dragons Miniatures Game is a collectible miniatures game played with pre-painted, plastic miniature figures based on characters and monsters from the Dungeons & Dragons game. The figures are 30mm in scale.

How tall are Warhammer 40k miniatures?

40k is nominally 28mm scale, meaning that a miniature for a human of average height is supposed to be 28mm tall. Size creep over the years means most models are taller than that now. Primaris are close to 40mm tall, but that’s larger than most other infantry.

What scale are 10mm miniatures?

10mm figures are roughly 1:160 scale, they should stand about 10mm tall foot to eye (there has been a small amount of scale creep and our ranges tend to be between 10.5mm to 11mm foot to eye.

What is 28mm wargaming?

28mm: The Wargaming Go-To The 28mm scale reigns supreme in miniature wargaming. It typically means a figure measures 28mm from base to the eyes or head. Then there’s ’28mm heroic scale’ with its bigger heads, hands, and feet, making these miniatures easier to paint and more striking on the table.

What scale is 28mm wargaming?

Explore Our Range of 28mm Figures & Wargames Our 28mm figures and wargames are close to 1/60 to 1/76 model scale, but they may appear large due to the sculpting and thick bases.

What scale is Warhammer Old World?

Warhammer: The Old World miniature scale GW confirmed in its July 2021 article that the Warhammer: The Old World miniatures scale will be the same as the original Warhammer Fantasy Battle, 28mm – putting paid to scurrilous rumours it might go either bigger or smaller.

What size are Warhammer miniatures?

Warhammer 40k miniatures range from 28mm scale (which is also 1:64) to 32mm scale (1:57.2). This slight variation in scale allows for a more dynamic and visually interesting array of figures. The larger scale is used to give more presence to certain figures, enhancing their importance or power on the battlefield.

Can you play D&D with miniatures?

Experienced D&D players may all come to a similar conclusion about the use of figurines, and for good reasons. A session of D&D can use just “theater of the mind” or make heavy use of figurines and terrain pieces on a grid map, and both are viable ways to play.

What scale is BattleTech?

In Battletech Alpha Strike and tabletop (non-hex-based map) rules for BattleTech use of 3D miniatures is standard. 3D miniatures in BattleTech generally uses a 1/285 or 6mm scale, though the consistency of scale can vary between or even within certain miniature lines.

What are the playing dimensions for Warhammer 40K?

Warhammer 40K’s standard table size is 6’x4′, but your game of choice may call for a different sized table.

Does model height matter in 40K?

It does actually affect gameplay, in a big way. A full size Ogryn will block the ranged classes by 20-30% more than a short one, this is a mathematical fact. It will also be too big to actually pick up several scrips/grims because the character model doesn’t physically fit in their hiding spots.

What scale is Necromunda?

As in its parent game Warhammer 40,000, Necromunda uses 28 mm miniatures (approximately 1:56) and terrain (in this case, the Underhive – a heavily polluted, underground industrial environment).

Is 40K canon to Warhammer?

Within the Warhammer 40,000 community, most content created or licensed by the franchise’s owner, Games Workshop, Limited, is considered canon. However, due to the myriad sources and the extended time period that lore has been produced over, some sources are considered “more” canon than others.

Why Warhammer is 40,000?

“Warhammer 40,000” is a tabletop miniature wargame created by Games Workshop, and the number 40,000 represents the setting’s distant future timeline. The “40K” signifies the fictional universe’s setting being set in the 41st millennium.

Is Warhammer 40K a spin off?

Warhammer 40,000 was originally conceived as a science-fiction spin-off of Warhammer Fantasy. Although the games share some characters and tropes, their settings are separate.

Is 40k 28mm?

It’s typically considered to be 28mm heroic scale. That means it’s kind of 28mm but some features like weapons are modelled slightly larger for emphasis and style.

Are Warhammer models 28mm?

In Games Workshop’s Warhammer and Warhammer40k, we say the miniatures are 28mm scale, but what does that actually measure? Its not base size, or height. It’s the same as having a scale of 1:64. 28×64=1792 or about 1,79 meter which is presumably the average height for a normal human male in that world.

What is the standard size of Warhammer 40k?

Warhammer 40,000’s 10th edition board dimensions, including Crusade, Matched Play, and Open Play, depend on game size: Combat Patrol games are played on a 44×30″ board. Incursion and Strike Force games (1000 points / 2000 points) are played on a 44×60″ board. Onslaught games (3000+ points) are played on a 44×90″ board.

How big is a 32mm figure?

32mm Scale means that from foot to eye level on a standard human standing upright, its 32mm.

Is Warhammer 40k a 32mm miniature?

What scale is 40K?

How tall is a Warhammer 40k model?

Why is 40K so complicated?

Here is a 545-word article about what scale Warhammer 40k is, written in the first-person perspective with a FAQ section at the end:

What Scale is Warhammer 40k?

As an avid Warhammer 40k enthusiast, I know the importance of understanding the scale of the models and miniatures in this beloved tabletop wargaming universe. The scale of Warhammer 40k models is a crucial aspect that can greatly impact the overall gaming experience, the level of detail, and the immersion for players.

In the Warhammer 40k universe, the models and miniatures typically use a 28mm scale, also known as the “heroic scale.” This scale refers to the approximate height of the miniature representing a standard human-sized character, which is around 28 millimeters (a little over 1 inch) from the base to the top of the head.

The 28mm scale is often considered the “standard” for Warhammer 40k and many other tabletop wargaming systems. This scale provides a good balance between detail, size, and ease of handling during gameplay. The models are large enough to showcase intricate details and painted features, yet small enough to be easily transported and maneuvered on the tabletop.

One of the key advantages of the 28mm scale in Warhammer 40k is the level of detail that can be achieved. The miniatures are sculpted with incredible precision, allowing for the capture of the unique aesthetic and characteristics of each faction, unit, and character. From the ornate power armor of the Space Marines to the twisted and haunting forms of the Necrons, the 28mm scale allows the models to truly come alive and immerse players in the gritty, futuristic setting of the 41st Millennium.

Another aspect of the 28mm scale that makes it well-suited for Warhammer 40k is the sense of scale and proportion it provides. The models are large enough to represent the towering, superhuman figures of the Space Marines and the hulking, monstrous creatures of the Tyranids, while still maintaining a cohesive visual harmony across the various factions and units.

This scale also allows for a more tactical and immersive gameplay experience. The models are large enough to be easily distinguished and maneuvered on the tabletop, making it easier for players to visualize the positioning and movement of their forces. The scale also lends itself well to the expansive and epic battles that are a hallmark of the Warhammer 40k universe.

In conclusion, the 28mm “heroic scale” used for Warhammer 40k models is a perfect fit for this beloved tabletop wargame. It provides the right balance of detail, size, and ease of use, allowing players to fully immerse themselves in the grim, dark future of the 41st Millennium.

FAQs:

Q: What is the exact scale of Warhammer 40k models?
A: The standard scale for Warhammer 40k models is 28mm, also known as the “heroic scale.”

Q: Why is the 28mm scale used in Warhammer 40k?
A: The 28mm scale provides a good balance between detail, size, and ease of handling during gameplay. It allows for the capture of intricate details in the models while maintaining a cohesive visual harmony across the various factions and units.

Q: Can I use models of a different scale in Warhammer 40k?
A: While it is possible to use models of different scales in Warhammer 40k, the 28mm scale is considered the standard and is the scale most commonly used by the majority of players and manufacturers. Using models of a different scale may impact the visual consistency and immersion of the game.

Q: How does the 28mm scale compare to other wargaming scales?
A: The 28mm scale is a common scale used in many tabletop wargaming systems, including Warhammer Fantasy Battle, Infinity, and numerous historical wargaming miniatures. This scale provides a good balance between detail and handling compared to smaller scales like 15mm or larger scales like 54mm.